1000w 7-24V BLDC 3 Phase Brushless Motor Driver Board Hallless Speed Controller Regulator with Potentiometer and Switch

Generators7-24V BLDC 3 Phase Brushless Motor Driver Hallless 1000W Motor Drive Board Speed Controller Regulator with Potentiometer and SwitchSpecification:Working voltage: 6-20V (limit 24V)Drive current: rated 30A plus air cooling 50AMaximum power: 1000WOvercurrent protection: YesLocked-rotor protection: Yes (after locked-rotor, the current will automatically drop and run at intervals)Over-temperature protection: Yes (over-temperature power is halved)Maximum speed: 224000 RPM (2 pole motor), 74000 RPM (6 pole motor), 40000 RPM (12 pole motor), 35000 RPM (14 pole motor).Precautions:1. Reverse connection of the positive and negative poles of the power supply on the motherboard will cause permanent damage to some of the chips on the board (large current will not work for a few seconds)2. There is sampling over-current protection at the output of the motor during normal operation. Because the power and current of the module are very large, please do not artificially short-circuit the module when the module is not working normally. Once the short-circuit, the circuit may be burnt and the tube may burst, the first wiring test Please test with low current and low voltage. After ok, connect with high current and high voltage. Since it is a bare board module, please pay attention to the insulation of the wiring head. It is strictly forbidden to touch the board parts3. Do not connect the motor that is obviously inconsistent with the drive module voltage, current, or power, to avoid inexplicable damageNote: 1. Due to the light and screen difference, the item's color may be slightly different from the pictures.2. Please allow 1-3cm differences due to manual measurement.Package Included:1x Brushless Motor Driver==========Motor Type : Motor

• Generators
• 1000w 7-24V BLDC 3 Phase Brushless Motor Driver Board Hallless Speed Controller Regulator with Potentiometer and Switch